A slow-draining gully or rising water outside your kitchen door needs prompt action; left unchecked, it can flood patios, damage brickwork and attract pests. The guide below explains how to diagnose and unblock an outside drain with everyday tools, plus the warning signs that mean it is time to call a professional.
Is my outside drain really blocked?
- Standing water that does not clear within a minute of hosing.
- Gurgling sounds or foul odours around the grate.
- Overflow when your dishwasher, washing machine or downpipe discharges.
Any of these symptoms point to a restriction in the gully trap or the first length of pipe.
Safety kit before you start
Rubber gloves, eye protection and sturdy shoes are non-negotiable; outside drains harbour bacteria and sharp debris. Add a flat-head screwdriver or pry bar to lift the cover, a bucket for waste, a garden hose and if you have them, drain rods with a plunger head.
Step-by-step: how to unblock an outside drain
- Remove visible debris: Lift the grate and scoop out leaves, moss and silt into the bucket. This improves visibility and prevents fresh material falling in later.
- Initial flush with a hose: Push the hose a short way into the pipe and run water. If it backs up quickly, the blockage sits deeper.
- Plunge or rod the pipe: No rods? Tie a thick plastic bag around an old mop head to form a makeshift plunger. Work it up and down to create hydraulic pressure. Have rods? Attach the plunger head, feed in clockwise and keep turning clockwise. Anticlockwise unscrews the joints and strands a rod underground. Continue until the water level drops.
- Pressure flush: Pack old towels tightly around the hose to seal the opening, then turn the tap fully on for ten seconds. The built-up pressure often blasts remaining sludge away.
- Final rinse and inspection: Run clear water for a full minute. If flow is brisk and no debris returns, replace the grate and disinfect the area with hot water and washing-up liquid.
When should I call a professional engineer?
- The rods stop abruptly – a sign of root ingress or collapsed pipe.
- Repeated blockages in the same spot.
- Foul sewage is backing up or you smell gas.
Plumus’ drainage team carries CCTV cameras and 4 000 psi jetting rigs and can be at any London postcode within the hour, day or night. One visit clears 95% of blockages and includes a written condition report for your records.
Preventing future blockages
- Fit a stainless-steel mesh over the grate to stop leaves entering.
- Never pour cooking oil or fat down kitchen sinks; store it in a sealed container and bin it.
- Flush the gully monthly with an enzyme drain cleaner or a kettle of boiling water followed by a litre of cold water to move soft sludge.
- Schedule an annual CCTV survey if your property is surrounded by mature trees; early root detection is cheaper than excavation.
FAQs
Can I use caustic soda to unblock an outside drain?
You can, but it must be handled with extreme care and it is ineffective against solid debris like stones or roots. Mechanical methods are safer and usually faster.
How far should drain rods go before I call for help?
If you have joined three full-length rods (around six metres) and still meet resistance, stop. – Pushing harder risks damaging the pipe.
Are outside drain blockages my responsibility or the water company’s?
Anything within your property boundary is yours to maintain. Shared drains beyond that point fall to the local water authority.
Will a pressure washer damage the pipe?
Domestic pressure washers are safe if you keep the lance moving. Professional jetters run higher pressures but include rotating nozzles that protect the pipe wall.
How quickly can Plumus attend?
Our engineers operate 24 / 7 / 365 and aim to reach most Greater London addresses within 60 minutes. You can call us on 020 7126 7126 at any time.





