An F75 code tells the boiler it cannot detect the brief surge in water pressure that should occur when the internal pump starts. In practice that usually points to one of three issues:

  1. Low system pressure (below 1 bar).
  2. Blocked or failed pressure sensor coated in magnetite sludge.
  3. Stuck or worn pump that is no longer circulating water.

The boiler shuts down to protect itself, leaving you with no heating or hot water.

If your display is showing F28 rather than F75, that is a different fault. F28 means the boiler never lit at all, usually a gas supply or ignition problem rather than circulation. Our guide to the Vaillant F28 fault code covers the safe checks for that one.

Quick checks you can do safely

  • Read the pressure gauge: if it is under 1 bar when the system is cold, open the filling-loop valves and raise it to 1.2–1.5 bar. Close both valves firmly afterwards.
  • Bleed a cool radiator: trapped air can stop pressure rising; remember to re-check the gauge and top up again if needed.
  • Press the reset symbol (crossed-out flame) for five seconds. The boiler will attempt to fire.

If the fault clears and stays away for a week, you have probably solved it. If it returns within hours or the pressure keeps falling, read on.

When to call Plumus’ Gas Safe engineers

Some fixes are not DIY territory. Vaillant specifies that pump or sensor work must be completed by a competent, Gas Safe registered engineer. Plumus keeps both upgraded pumps and brass pressure-sensor kits on every 24/7 response van, so most F75 jobs are finished in a single visit. We aim to be at your door in under an hour anywhere in Zones 1-4.

    How our engineers fix persistent F75 errors

    1. Full diagnostic – we compare the sensor reading with a calibrated gauge to confirm whether the part is giving false feedback.
    2. System health check – magnetic filter inspection, water-quality test and pump speed verification.
    3. Targeted repair – we:
      • Replace a faulty sensor with the latest brass-bodied unit.
      • Free or swap a seized pump and balance the speed settings.
      • Flush small sections of pipework if sludge is restricting flow.
    4. Commissioning & paperwork – combustion tests, warranty records and Gas Safe notification where required.

    Because the parts travel with the engineer, there are no return visits or “waiting for stock”.

    Preventing F75 in the future

    • Annual service: keeps your warranty valid and lets an engineer remove debris before it reaches the sensor.
    • Magnetic system filter: captures magnetite and extends component life.
    • Chemical inhibitor after a power-flush: slows fresh corrosion.
    • Monthly gauge glance: topping up before the level drops below 1 bar stops the boiler tripping out.

    A little routine care is cheaper than a mid-winter breakdown.

    FAQs

    Is it safe to keep resetting the boiler?

    One reset after topping up pressure is fine. Repeated resets strain components and can mask a serious circulation fault—book an engineer if the code returns.

    How much does a professional F75 repair cost?

    Plumus charges transparent time-based rates with no call-out fee; most F75 faults are fixed within the first hour plus the cost of any parts.

    Could a hidden leak be causing low pressure?

    Yes. If you repressurise the system and the gauge drops again within days, a small leak or faulty expansion vessel may be the root cause. An engineer will pressure-test the circuit to locate it.

    Do newer Vaillant models still suffer from F75?

    The issue is less common on post-2012 boilers thanks to improved sensor design, but sludge or low pressure can still trigger the code.

    Will a power-flush stop the error coming back?

    If sludge is the cause, a power-flush followed by inhibitor and a magnetic filter is the best long-term prevention strategy.

    Need help right now?

    If your Vaillant boiler is still flashing F75, Plumus’ Gas Safe team is available 24 hours a day, 365 days a year. Call 020 7126 7126 and an engineer can be with you within the hour.